Skip to Content
RESELLER
  1. All Products
  2. Arduino® Make Your UNO Kit

Arduino® Make Your UNO Kit

https://rato-education.odoo.com/web/image/product.template/2693/image_1920?unique=9756746

AKX00037

A kit with all you need to learn how to solder by building your own Arduino UNO and wave synthesizer shield.

55.00 € 55.0 EUR 55.00 € Tax Included

55.00 € Tax Included

Contacteer ons voor prijs en levertermijn

This combination does not exist.

Contact Us

General terms and conditions
Contact us for a free quote

Internal Reference: ARD-AKX00037
Barcode: 7630049203433

The first Arduino UNO was launched back in 2005, with a clear goal of enabling anyone who had an idea to realize it through a simple and open interface..


The Arduino Make Your UNO Kit is the natural extension of a story that will shape the makers of tomorrow, a step into the past to move forward into a brilliant future.

The Arduino Make Your UNO Kit is a 3 in 1 experience where the user learns the basics of electronics, becomes familiar with soldering and eventually builds a synthesizer with the included shield and upcycled packaging


The Arduino Make Your UNO Kit experience is unique: you will be able to build an Arduino UNO from scratch, assemble each component and become familiar with circuits and electronics.

A complete online manual with a 3D viewer makes it easy and fun to follow, even for an absolute beginner. Never soldered before? No worries, a practice board is included to test and improve your soldering skills! There is a debugger to check that your board works properly once it is assembled.


After learning comes the fun part: the uniqueness of the Arduino Make Your UNO Kit is not just in the assembly. At the end of the process, you'll have a fully functioning synthesizer synthesizer ​

content:

  • Arduino Make Your UNO
  • 1 x Make Your UNO PCB
  • 1 x USB C Serial adapter Board
  • 7 x Resistors 1k Ohm
  • 2 x Resistors 10k Ohm
  • 2 x Resistors 1M Ohm
  • 1 x Diode (1N4007)
  • 1 x 16MHz Crystal
  • 4 x Yellow LEDs
  • 1 x Green LED
  • 1 x Push-Button
  • 1 x MOSFET
  • 1 x LDO (3.3V)
  • 1 x LDO (5V)
  • 3 x Ceramic capacitors (22pF)
  • 3 x Electrolytic capacitors (47uF)
  • 7 x Polyester capacitors (100nF)
  • 1 x Socket for ATMega 328p
  • 2 x I/O Connectors 
  • 1 x Connector header 6 pins
  • 1 x Barrel jack connector
  • 1 x ATmega 328p Microcontroller

     
  • Arduino Audio Synth
  • 1 x Audio Synth PCB 
  • 1 x Resistor 100k Ohm
  • 1 x Resistor 10 Ohm
  • 1 x Audio amplifier (LM386)
  • 1 x Ceramic capacitors (47nF)
  • 1 x Electrolytic capacitors (47uF)
  • 1 x Electrolytic capacitors (220uF)
  • 1 x Polyester capacitor (100nF)
  • 4 x connectors pin header 
  • 6 x potentiometer 10k Ohm with plastic knobs

     
  • Spare parts
  • 2 x Electrolytic capacitors (47uF)
  • 2 x Polyester capacitor (100nF)
  • 2 x Ceramic capacitors (22pF)
  • 1 x Push-Button
  • 1 x Yellow LEDs
  • 1 x Green LED

     
  • Mechanical parts
  • 5 x Spacers 12mm
  • 11 x Spacers 6mm
  • 5 x screw nuts
  • 2 x screws 12mm


*Deze kit bevat geen soldeerbout of soldeertin.